24 results
Remote temperature monitoring (RTM) is an important part of the cold chain system for vaccines to ensure their potency. In Tanzania, the Ministry of Health (MOH) made a significant investment in cold...
This TechNet-21 webinar on vaccine vial monitor (VVM)-based vaccine management was given on the occasion of the publishing of “The Book of VVM: Yesterday-today-and-tomorrow” by Umit Kartoglu....
This specification describes general performance requirements for nonelectronic Combined Vaccine Vial Monitor (VVM) and Threshold Indicator
(TI).
This document describes the procedure for verifying the performance of threshold
indicators. This protocol covers the testing of passive products only.
This specification describes the performance requirements for non-electronic
threshold indicators which give a visual warning when a certain temperature
has been exceeded during transport and...
This specification describes general performance requirements for nonelectronic Combined Vaccine Vial Monitor (VVM) and Threshold Indicator
(TI).
This presentation was used during the TechNet-21 webinar on vaccine vial monitor (VVM)-based vaccine management, on the occasion of the publishing of “The Book of VVM:...
The Q-tag 2 plus can be programmed with 5 alarm limits between –25°C to +50°C according to individual customer specifications.
The economical chemical indicators can be started individually by pulling out the start strip. They measure only one or max. 2 temperature limits per indicator and are available for the following...
The Freeze-tag monitors the temperature of its environment and shows you on the display if there has been an exposure of below 0 °C / +32 °F for over 10 minutes.
The Q-tag Quad is a temperature monitoring indicator which measures reliably and precisely environmental temperature in which it is situated.
Berlinger’s electronic indicators provide a temperature monitoring system which
satisfies the highest quality requirements. Their long operating life of up to 5 years
makes them ideal companions...
WHO Vaccine Management Handbook: How to monitor temperatures in the vaccine supply chain. WHO IVB 15.04
Key Points:
CDC recommends that practices maintain a calibrated, temperature monitoring device (data logger) and manually record temperatures in each unit containing Vaccines For Children (VFC)...
International efforts to eradicate smallpox in the 1960s and 1970s provided the foundation for efforts to expand immunization programmes, including work to develop immunization supply chains. The...
The Immunization eLearning Initiative, developed by WHO and UNICEF, now offers four rapid e-courses that can be taken in less than one hour. These courses include: Multi-Dose Vial Policy, Vaccine...
Temperature Monitoring in the Vaccine Cold Chain is an advanced ISCM online mini-course that examines one vaccine’s journey in the fictitious country of Makari from airport arrival to the point of...
Cold chain management is a specific part of supply chain management. Cold chain management deal with products that should be transported and stored in certain conditions. Monitoring the temperature...
Report from a workshop organised in Madagascar in August 2013 for choosing a 30DTR device and training
Example of a table to define roles and responsibilities within Temperature Monitoring
This intervention study was conducted in Albania to establish the superiority of the Fridge-tag (30-day electronic refrigerator temperature logger) against thermometers. Intervention sites used...
This document describes the procedure for verifying the performance of
programmable electronic temperature and event logging systems with remote
alarming and remote, periodic, and automatic...
This specification describes the performance requirements for programmable
electronic temperature and event logging systems with remote alarming and
remote, periodic, and automatic reporting for...
Report on the CCIS project in Laos, University of Washington, MOH/NIP Laos, HISP India, Unicef Laos, PATH